Jacobhouse – Page 73

A day well-filled.

7/5/19 (Above: The office light, switch, and paneling installed on Closet-wall’s east side.) Preface: Today was quite a long and […]

7/4/19 (Above: The first rivet I have ever installed within Jacobhouse. To think I was learning to how to take

7/3/19 (Above: The first piece of galvalume paneling cut for Wall #6 of Jacobhouse [the right side].) Building Summary: Today’s

7/2/19 (Above: The fridge and oven are now in their final positions, waiting patiently to fulfill their functions.) Building Summary:

7/1/19 (Above: The Padre-fabricated connector between 1/2″ CPVC to the refrigerator.) Building Summary: Today, Padre and I started by testing

6/30/19 (Above: The fridge bridge allowing full access to Jacobhouse’s postern wall.) Building Summary: Today I started off by measuring,

6/29/19 (Above: The now fully plywood’ed and shelved Closet-Wall.) Building Summary: Today I finished plywood’ing the Closet-Wall*. This included the

6/28/19 (Above: The closed-in closet wall with half of its shelves in place. I cut the other half slightly too

6/27/19 (Above: One of the two pieces of plywood I cut for Wall #5. This is for the east side.)

6/26/19: (Above: Brace-boards, plywood, and shelving brackets all fastened in place.) Building Summary: Today I began by fastening on all